Page 2
CREASING
INDEX
THE STACKER ASSEMBLY
Setting the Height Adjustable Stacker unit
28
Setting the Optional Stacker unit
30
PERFORATING
Equipment, spares
31
Setting the perforating blade position
32
THE BLADE ASSEMBLY
Setting the blade pressure
34
REPLACING CREASING BLADE SETS
Installing crease blade sets
35
Spares
37
CROSS PERFORATING KIT
38
TROUBLE SHOOTING
39
DISPATCH KIT
47
ACCESSORIES & OPTIONS
48
RECOMMENDED SPARES
49
FUSE POSITIONS AND RATINGS
51
PRODUCT RECYCLING & DISPOSAL
52
INTRODUCTION
The Morgana AutoCreaser Pro 33A
PAGE 3
SAFETY Do’s & Don’ts
4
THE AUTOCREASER PRO 33A
Labeled Picture
6
THE CONTROLS
The switch panel
7
Features on the switch panel
7
QUICK START GUIDE
8
SCREEN CALIBRATION
19
OPERATING THE MACHINE
Setting the machine
20
Setting up a job
24
Loading & saving
25
Paper jamming
27
Page 3
SYSTEM
INTRODUCTION
AutoCreaser Pro 33A
AutoCreaser Pro 33A
The Morgana AutoCreaser Pro 33A is a fully automatic suction feeding
creasing
system designed for use with both conventional litho and digital
printers.
The feed on the AutoCreaser Pro 33A can also be manually operated for use
with heavy stock, very small or very large sheets, embossed or even irregular
sheets.
The crease is programmed from the leading edge of the sheet using the
controls on the front panel.
The blade and anvil are mechanically controlled over their entire length
and can be adjusted to accommodate various weights of media.
IMPORTANT
The operating environment should be controlled to a temperature between
16° C and 27° C Maximum.
Specification
Feeding System ................................................Bottom suction feed
Max. Sheet Size ................................................900mm x 330mm (27.5” x 12.6”)
Min. Sheet Size (in automatic mode)................. 210mm x 140mm (8.5” x 5.5”)
Max. Paper Thickness .......................................0.4mm (varies according to hardness,
type of fold, and substrate)
Max. No. Creases per Sheet ............................ 16
Min. Distance Between Creases ....................... 0.1mm
Max. No. Stored Programes ............................. Unlimited
Min. Crease Distance from Leading Edge ........ 2.5mm
Min. Crease Distance from Tail Edge ................35mm
In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed.
Speed per Hour (A4 in half)...............................8500
Speed per Hour (A5 in half)...............................11000
Dimensions ....................................................... L: 1450mm H: 1224mm W: 522mm
L: (57”) H: (48.2”) W: (20.5”)
Weight ............................................................... 121Kgs (+50Kgs packing)
Power Requirement .......................................... 1 phase 230v 50Hz
1 phase 220v 60Hz
Sound Power Level ........................... 78.0 decibels
*As part of our continued product improvement plan, specifications and information
published in this manual are subject to change without notice.
All specifications are dependant on application, type of stock, temperature, RH and print
engine used.
Specifications quoted were measured on uncoated and unprinted stock. E & OE.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
