REVERSE DOOR
7
Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is disconnected from the power supply and empty of contents.
•
It is necessary to tilt the unit backwards to detach the door. Preferably rest the unit on a
solid object so that it will not slip during the door reversing process.
•
All parts removed must be saved for the door reinstallation process later.
•
Do not lay the unit flat as this may damage the coolant system.
•
It is recommended that 2 people handle the unit during assembly and disassembly.
1.Remove two screws
at rea side of top
cover.
6
REVERSE DOOR
2.Remove top cover
and thermostat
knob, then place it
aside.
3.Unscrew top hinge
and remove door.
Place it on a soft
pad to avoid
scratches.
unscrew
9.Place the top cover
on and secure with 2
screws at the back.
DOOR HANDLE INSTALLATION
Space requirement:
Ensure adequate
space for door to
swing open
LEVELLING THE APPLIANCE
•
Adjust the two levelling feet at the front of the appliance.
•
If the appliance is not levelled, the doors and magnetic seals will not be covered properly.
10. Reinstall the
thermostat knob.
F
F
F
F
F
Lengthen
Shorten
4.Unscrew bottom
hinge. Then remove
the adjustable feet
from both sides.
5.Unscrew and
remove the bottom
hinge pin, then turn
the bracket over and
replace it.
6.Refit the bracket
fitting the bottom
hinge pin. Replace
both adjustable feet.
8. Reassemble the door. Ensure door is horizontally and
vertically aligned so that the seals are closed on all sides
before finally tightening the top hinge.
7.Detach the fridge
and freezer door
gaskets and
reassemble them
back after rotation.
Unscrew
Screw
A 550
B 580
C 1420
D min=0
E min=50
F
G 1100
H 1130