Moretti ARDEA MOBILITY 220, Instruction Manual

Page: 48 / 72

12
ENGLISH
10.3 Before every use
1. Check the tyres are correctly inflated, if present.
2. Check all the electrical connections and make sure they are properly connected and not
corroded.
3. Check all the cables and make sure they are connected properly.
4. Check the brakes.
10.4 Weight limits
1. Check the information on maximum capacity in the table of the technical specifications in this
manual or on the label on the device. The power of the scooter is assessed according to the
capacity.
2. Comply with the weight limits indicated for your scooter. Exceeding the maximum capacity
invalidates the warranty. The manufacturer cannot be held liable for injury or damage to
property caused by failure to comply with the weight limit.
3. Do not carry passengers on the scooter, as this could alter the centre of gravity and cause it
to tip over or fall.
10.5 Temperature
1. Certain parts of the scooter are affected by changes in temperature. The controller only
functions at a temperature between -25 C° and 50 C°.
2. The batteries could freeze at extremely low temperatures and prevent your scooter from
operating. In extremely hot climates, the scooter might only function at lower speeds, due
to a safety feature of the controller that prevents damage to the engine and other electrical
components.
11. FUNCTIONING OF THE SCOOTER
Your scooter is simple to use. However, it is recommended to read the following instructions
carefully, to familiarise yourself with your new vehicle.
11.1 Control panel
WARNING!
Before switching on the scooter, always be aware of your surroundings when
selecting the speed. It is recommended to select the slowest speed for use indoors.
It is recommended to select a speed that allows you to control the scooter safely for
use outdoors. The steps listed below are necessary to operate your scooter safely.