*REFER TO CHECK SHEET FIRST
1/99
Always use this equipment in accordance with your local OSHA guidelines.
TRANSPORTING THE BRUSH CHIPPER
SAFETY MAINTENANCE
1 .
The standard towing hitch on the brush chipper is either a 2 1/2" Lunet ring or a 2" ball. Be
sure the towing vehicle hitch is properly equipped for the hitch on your brush chipper. The towing
vehicle should be capable of handling a minimum of 1000# tongue weight.
2 .
Check to make sure that hitch has been properly attached and safety pins installed.
4 .
Check tire pressure to ensure proper inflation: which is found on the side of the tire.
5 .
Hook up electrical connections and be sure tail lights and turn signals function properly.
6 .
Cradle safety chains under towing hitch and securely attach them to the towing vehicle. Raise
tongue jack and swivel to horizontal position.
7 .
Clean infeed of all debris.
8 .
Securely attach safety chains and raise tongue jack.
9 .
Remove wheel blocks and check around machine for any tools or loose items that might
be lost during transport.
10. Before moving your brush chipper be sure to check wheel rims for fatigue or loose bolts.
2 7
Summary of Contents for TORNADO 13
