4
Vehicle Preparation
1.
Remove driver’s side lower dash
panel, located directly under the
steering column & steering column
shroud.
A. Remove (2) screws on the bottom
left side and right side of dash
panel.
Dakota (ND) Only-
Remove (2)
screws at the brake release handle
and disconnect the brake release
lever.
Dakota (ND) Only-
Using a panel
removal tool, remove the cover on
the left side of the dashboard and
remove the (2) screws behind the
panel.
B. Unclip the lower dashboard panel
and remove the metal kneeblocker
panel if the vehicle is equipped.
C. Remove (3) screws on bottom of
steering column shroud.
D. Remove the tilt steering knob.
E. Separate and remove the steering
column lower panel.
Overview
The remote starter module harness will interface with the existing ignition switch
connector, four center-splice connections, and a ground termination. Two wires will
be routed through the cowl panel, to a hood-mounted safety switch and tachometer
connection.
1
1
1
12
12
12
12
12
12
1
1
1
12
12
12
1
1
1
123
123
123
12
12
12
12
12
12
123
123
Dakota (ND) Only
