2
On-Off Button
Press
to turn on or off the unit.
NOTE: The unit will initiate automatically the Energy Saver function under cool, Dry, Auto (only Auto-Cooling and
Auto-Fan) modes.
Up and Down Button
Press or hold either Up( ) or Down( ) the setting temp 2
℉/
1
℃
each times from 62
℉
(17
℃
) to 86
℉
(30
℃
).
Also can be used for time adjust in Timer function.
Some models press and hold both Up and Down buttons for 3 seconds, will change the display from
℉
to
℃
.
Mode select Button
Press to change the operation mode, each time you press the button, a mode is selected in a sequence that
goes from Auto, Cool, Dry and Fan.
The unit will initiate automatically the Energy Saver function under Cool, Dry, Auto (only Auto-Cooling and Auto
Fan) modes.
Base on Energy Stars’ requirement.
Fan speed Button
Press
to change the fan speed, each time you press the button, the fan speed in four steps, Auto, Low, Med
and High. The fan speed can’t be adjusted under HEAT mode. On Dry mode, the fan speed is controlled at Low
automatically.
Timer Button
Press
to start or stop the Auto On or Auto Off function. Press or hold either Up ( ) or Down ( ) the setting
time from 0.0 to 24 hours.
Sleep Button
Press
to start or stop the sleep function.
Energy Saver Button
Press
to start or stop the energy saver function. This function is available on Cool, Dry, Auto (only
Auto-Cooling and Auto-Fan) modes.
When the room temp is meet the compressor shut off condition, the fan motor will continue running for 3 minutes,
after that, the fan motor will running for 2 minutes every 10 minutes, until the compressor start.
Check Filter Button
This function is a reminder to clean the Air Filter for more efficient and more health. The LED light will keep
illuminate after 250 hours of operation, until press
.
Summary of Contents for TM08CEM9115S
Page 9: ...7 3 Internal Structures...
