Service and Maintenance Instructions (cont.)
To Change A Thermostat
1)
Remove the RH inner oven side panel.
2)
Remove the vertical control panel (one screw on underside - two screws on top).
3)
Unclip thermostat phial and feed back through side panel into void.
4)
Unfasten thermostat from bracket (one nut) and disconnect wires.
5)
Fit new thermostat and reverse the above procedure.
To Change Neons
1)
Remove the vertical control panel (one screw on underside – two screws on top).
2)
Disconnect neon wires.
3)
Unscrew neon from control panel (one nut).
4)
Fit new neon and reverse the above procedure.
To Change A Rectangular Hotplate Element
1)
Lift the hotplate and invert on top of the adjacent plate, taking care not to strain the flexible
connection.
2)
Remove the terminal cover (three screws).
3)
Disconnect the element tails from the terminal block.
4)
Unscrew the cover plate nut and carefully slide the cover plate over the terminals to gain access
to the elements.
5)
Unscrew the individual element clamp (three screws) and remove.
6)
Replace element (cutting tails to suit) and reverse the above procedure.
Manual Part No: 930158-01
MD Electric Range
- 30 –
Manual Rev No: 1
