Moore UNIDRILL 300, Manual

Page: 52 / 91

Optional Equipment
Electro Diverter Valve.
P2. Tractor
Pressure line
P1. Tractor
Return line
C4. Rear Axle
Ram Inlet line C1. Rear Axle
Ram Return line
C3. Drawbar
Ram Inlet line C2. Drawbar
Ram Return line
Electro Diverter Valve:
The Electro Diverter Valve is a valve block which controls the operation of two hydraulically
operated functions. In this instance the functions are 1. Work or transport position adjustment
of the rear axle, and 2. Depth adjustment of the drill via the drawbar cylinder.
Operation
Place the plug into the tractors 12 volt supply.
Attach the trigger switch Joystick to the appropriate double acting spool valve lever in the
tractor cab.
The rear axle cylinders will extend / retract when the appropriate spool valve has been
operated in the tractor.
When the button is pressed and held down on the joystick, and the appropriate spool valve has
been operated in the tractor, the drawbar cylinder will extend / retract thus allowing depth
adjustment of the drill.
Trigger switch Joystick
51
Pin 1
Brown Pin 2
Blue
Electro Diverter Signal Herdsman
ITEM PART No DESCRIPTION
P1
HH3/4TH3/8 Tractor to Electro Diverter hose. Return Line
P2 HH3/4TH3/8 Tractor to Electro Diverter hose. Pressure Line
C1 H3/8DC3/8 Drawbar to Electro Diverter hose. Return Line
C2
H3/4CA3/8 Rear Axle to Electro Diverter hose. Return Line
C3 H3/4CA3/8 Rear Axle to Electro Diverter hose. Pressure Line
C4 H3/8DC3/8 Drawbar to Electro Diverter hose. Pressure Line
Part No: ED - 01