Moore Tandem Uni-Drill DP400A, Instructions Manual

Page: 46 / 66

Warranty
In this warranty Moore Uni-Drill is referred to as the Company.
1.
Subject to the provisions of this warranty the Company Warrants each new
machine sold by it to be sold free from any defect in material or workmanship.
2.
If the machine or part there of supplied by the Company is not in accordance with
the warranty given in clause 1 the Company will at its option;-
(a)
Make good the machine at the Company’s expense, or
(b)
make an allowance to the purchaser against the purchase price, or replace the
machine as soon as reasonably practicable.
3.
This warranty shall not oblige the Company to make any repayment in respect of
loss of profit or other consequential loss or contingent liability of the purchaser
alleged to arise from any defect in the machine or impose any liability on the
company other than that contained in clause 2.
4.
Any claim under this warranty must be notified to the company in writing
specifying the matters complained of within 12 months from the date of
receipt be the purchaser or his/her nominee of the machine.
5.
Any claim under this warranty must be made by the original purchaser of the
machine and is not assignable to any third party.
6.
If the purchaser hires out the machine to any third party the warranty shall apply
only to matters notified to the Company within 90 days of the date of delivery and
clause 4 shall be read as if the period of 90 days were substituted for the period
of 12 months.
7. The warranty will cease to apply if:-
(a) any parts not made, supplied or approved in writing by the Company are
fitted to the machine, or
(b) any repair is carried out to the machine other than by or with the express
written approval of the Company, or
(c) any alterations not expressly authorised by the Company in writing are
made to the machine, or
(d) the machine is damaged by accident, or
(e) the machine is abused or overloaded or used for a purpose or load beyond
its design capabilities.
8.
Any dispute as to whether the goods are sold free from any defect in
workmanship or materials shall be referred to a single arbitrator to be agreed
between the company and the buyer.
46