Moore Tandem Uni-Drill DP400A, Instructions Manual

Page: 21 / 66

Settings
A: Distribution Settings
Follow setting instructions. Store rape shutters in a dry place and away from any
deterioration risks
4) Selecting the peg wheel
•
Rape Shutter fitting is to be carried out:
- with the hopper empty
- shutters to position 2
- flaps to maximum opening position
a) Engage plug (1) on the peg wheel so as to cover it
b) Rotate
c) Engage the spring pin
d) Set the flaps to position 1
•
Dismantling is done by reversing the procedure
•
Use pin B to unclip
•
Index
-
Standard peg (2) (large seed/cereals)
-
Fine peg wheel (3) rate < 8 kg/ha
5) Variator
•
Set the flow rate trial index using knurled wheel (4), and lever
•
Read values above the flat plate (5)
•
Each index change must be followed by a flow rate test. For information 3 vernier grades
correspond to about 10 kg/ha of cereals
•
Index from 0 to 90
21