NET Concentrator System
®
NCS
- 71 -
Moore Industries-International, Inc.
www.miinet.com
AOM
Current Source
Current Sink
Voltage Output
+Iout
-Iout
+Vout
-Vout
Terminal Connections
1 2
3 4
1 2
3 4
1 2
3 4
+Iout
-Iout
NOTE: To install wires into the
terminals, insert a small, flathead
screwdriver into the pry slot,
open wire terminal and place wire.
Connecting the AOM
Slide the external I/O module
along the DIN-Rail until the
DB25 link connects
to the adjacent module
Module
Number
AOM
ANALOG OUTPUT MODULE
Output Connections
Attach the analog outputs
to the terminals on the
bottom of the AOM.
+
–
Power
Supply
24Vdc OR 90-260Vac (EMM 20-30Vdc)
Verify Interface Module’s
input power
requirement (Vdc or Vac)
before applying power
Caution:
75mm
(2.96 in)
135mm
(5.34 in)
118mm
(4.66 in)
AOM FRONT
LEFT SIDE
RIGHT SIDE
Module
Number
AOM
ANALOG OUTPUT MODULE
87mm
(3.45 in)
AOM Module Figure 1.
AOM Dimensions
AOM Module Figure 2.
AOM Connection Diagram
Note:
Earlier Models have a different DIN latch but overall
dimensions are the same and both versions are
interchangeable.
