Monitor Components
1. The battery of
LC-BP01
is built-in rechargeable
li-polymer battery, the battery current is 1000 mAh.
2. AC adaptor powered mode: 5V 1A
Please use the AC adaptor and USB cable just like
the following picture:
Power Supply and Charge Power
Charging the power under following circumstances:
displays on the LCD
The LCD display is dim.
When powering on the monitor, the LCD doesn’t light up.
*
The battery of LC-BP01 is built-in rechargeable lithium-ion battery, please
do not disassemble it by the unauthorized maintenance personel.
* Under the normal using, it can charge power about 100 times, if the
battery cannot charge the power normally or the blood pressure monitor
cannot use normally, please connect with the authorized maintenance
personel.If measured three times per day, and the battery is fully charged,
it can be used for about 33 days.
* Storge and use the blood pressur
e monitor at the cool, dry and ventilated
environment. Avoid to approach to the fire and the heat source, or it will
cause the battery explode.
* Only can use the
moon’s authorized AC Adaptor (Model:
BLJ06L050100U-B \ BLJ06L050100U-V \ BLJ06L050100U-S
\BLJ06L050100U-U to charge the power. You cannot use the blood
pressure monitor during the process of charging.
* During the process of charging, the blood pressure monitor display
When the charging is finished, please pull the plug in time.
* When charging, shall not touch charging connector and the patient
simultaneously.
List
1.Blood Pressure Monitor
(LC-BP01)
2.AC Adapter
( Model: BLJ06L050100U-B
BLJ06L050100U-V
BLJ06L050100U-S
BLJ06L050100U-U
3.User Manual
4. Cuff (22cm-32cm or 22cm-42cm)
Component list of
pressure measuring system
1 PCBA
2 Air pipe
3 Pump
4 Valve
5 Cuff
CUFF
(Type BF applied part)
(Please use moon
authorized cuff. The size
of the actual cuff please
refer to the label on the
attached cuff.)
CAUTION
ON/OFF BUTTON
LCD DISPLAY
AIR CONNECTOR PLUG
DC POWER SOCKET
HAND PILLOW
AC adaptor
BEFORE YOU START
8
9
INTRODUCTION
VOICE ROADCAST BUTTON