background image

Help & Support

First please read this manual thoroughly (particularly the Troubleshooting section, if present). If a warranty is 
applicable, further details can be found in the Warranty Statement, 0080- STF-00139, available upon request.

Tritech International Ltd can be contacted as follows:

Address 

Tritech International Ltd 

Peregrine Road 

Westhill Business Park 

Westhill, Aberdeenshire 

AB32 6JL, UK

Telephone  

+44(0)1224 744 111

Email  

[email protected]

Website  

www.moog.com./tritech

Prior to contacting Tritech International Ltd please ensure that the following information is available:

1. 

The Serial Numbers of the product and any Tritech International Ltd equipment 
connected directly or indirectly to it

2. 

Software or firmware revision numbers

3. 

A clear fault description

4. 

Details of any remedial action implemented

Contamination

If the product has been used in a contaminated or hazardous environment you 
must de-contaminate the product and report any hazards prior to returning 
the unit for repair. Under no circumstances should a product be returned that is 
contaminated with radioactive material.

The name of the organisation which purchased the system is held on record at  Tritech International Ltd and 
information of new software or hardware packages will be announced at regular intervals. This manual may not 
detail every aspect of operation and for the latest revision of the manual please refer to 

www.moog.com/tritech

Tritech International Ltd can only undertake to provide software support of systems loaded with the software in 
accordance with the instructions given in this manual. It is the customer’s responsibility to ensure the compatibility 
of any other package they choose to use. 

Summary of Contents for Tritech Gemini 1200ik















Reviews:

Related manuals for Tritech Gemini 1200ik