background image

7

0746-SOM-00002 - 02

© Tritech International Ltd.

3.3  Connector Maintenance Guidelines

Mating surfaces should be lubricated with 3M Silicone Spray or equivalent, DO NOT GREASE. Connectors must 
be lubricated on a regular basis.
Clean plugs and receptacles with soap and fresh water.  If using alcohol or IPA to clean out the connector take 
care that it does not come into contact with any other part of the sonar.
When attaching a connector make sure that both connector and socket are completely dry.  Any water trapped 
in the connection could result in an electrical short and permanent damage to the sonar
If the Gemini has two ports then any unused bulkhead connector must have a blanking cap fitted prior to 
immersing in water.  Failure to do this will permanently damage the sonar.

3.4  Ground Fault Monitoring

The power supply within the Gemini includes an electrically isolated DC-DC converter front-end. There is a small 
capacitive connection between the isolated ground and the sonar chassis which should not noticeably affect 
any impressed current ground fault indicator (GFI) equipment.

3.5  Test Cables and Accessories

Deck test cables are available to aid with the setup and configuration of the sonar while on or off the vehicle.  
Tritech recommend the use of the deck test cables (below) as the first step in any diagnostic or fault finding 
activities.

WARNING

The Gemini PSU that is supplied with the Gemini system is intended for INDOOR 
USE ONLY and should not be placed in a position where it could get wet.

3.6  Subsea Cable Whips & Test Leads

Subsea cable tails (Whips) are available with both straight and right 
angle connectors suitable for the main and auxiliary ports of the 1200ik 
Sonar:

Part Number

Description 

S11583 XM

Impulse MKS(W)-307-CCP Right Angle Power & 
Comms Whip, X metres

S11584 XM

Impulse MKS(W)-307-CCP Straight Power & Comms 
Whip, X metres

S11624 XM

Impulse MKS(W)-307-CCP-RA to 12w Souriau Test 
Cable, X meters

S12042

Impulse MKS-300-FCR Blanking Plug

PSU

S11624 RA Impulse to 12w or 

S11560 STR Impulse to 12w 

Souriau Pwr / Ethernet Test Cable Xm

S11561 Gemini Power / Ethernet 

Break-out Cable

S11346 Gemini Imaging Sonar 

Power Supply Unit

Summary of Contents for Tritech Gemini 1200ik















Reviews: