background image

5

0746-SOM-00002 - 02

© Tritech International Ltd.

2.3  Diver Mask & Helmet Mounting Option

The 1200ik can also be mounted on 
a variety of diver helmets and masks 
with the use of our sonar mounting 
kits which are available for purchase.

Examples of some of those covered 
are: Kirby Morgan, Gorski, OTS 
& Interspiro. 
Should you require this option 
please contact Tritech for further 
information. 

2.4  Diver Mount Display (DMD)

The Diver Mounted Display together with the Gemini 1200ik multibeam 
imaging sonar, provides divers with a crisp acoustic image in low or zero-
visibility conditions.
The signal from the compact and lightweight diver-mounted sonar is 
sent to the surface support dive team over the umbilical, who are then 
also able to provide an extra set of eyes and assist the diver in identifying 
targets of interest.
By using the INODIVE mounting system the sonar can be positioned and 
relocated quickly and easily. This allows the sonar to be removed from the 
helmet or face mask easily for hand-held use in difficult to access situations, 
or where a lower viewing angle is required.

Tritech DMD system with Gemini 1200ik and display eyepiece

Summary of Contents for Tritech Gemini 1200ik















Reviews:

Related manuals for Tritech Gemini 1200ik