Replacement Parts List
RPVL4024 - STAINLESS LOWER TRIM RING
RPDC3369NY - CLEAR REPLACEMENT NYLON DOME
RP96RSORG16 - INNER SILICONE O-RING 8”
RP96RSORG23 - OUTER SILICONE O-RING 9”
RPVL4025 - STAINLESS HOUSING MAIN ASSEMBLY
RPPC4075 - PIN SEALED CONNECTOR
RPVL4029 - STAINLESS SUNSHIELD
RPVL4028 - STAINLESS UPPER CLAMP RING
Part Number
Description
N/S
N/S
N/S
N/S
N/S
Camera Bracket Electronics Assembly-fixed Housings
RPBRRH2110
Packet Assembly-Electrical
RPPKE1100
Camera Bracket Electronics Assembly-PTZ Housings
RPBRRN2102
Packet Assembly-Hardware-Fixed Housings
RPRH713
Packet Assembly-Hardware-PTZ Housings
RP46PKH2012
SILICON GASKET
After Camera installation. Attach lanyard to the
trim ring assembly.
• Después de la instalación de la cámara. Ate el acollador al montaje
del anillo del ajuste.
• Après installation d'appareil-photo. Attachez la lanière à l'anneau
d'équilibre.
• Nach Kamerainstallation. Bringen Sie Abzuglinie zum OrdnungsRing an.
• Após a instalação da câmera. Una o colhedor ao conjunto do anel
da guarnição.
• Dopo l'installazione della macchina fotografica. Attacchi la cordicella
all'assemblea dell'anello della disposizione.
Fasten trim ring assembly to main housing
with a phillips screwdriver.
• Sujete el montaje del anillo del ajuste a la cubierta principal
con un destornillador Phillips.
• Attachez l'anneau d'équilibre au logement principal avec un
tournevis Phillips.
• Befestigen Sie OrdnungsRing am Hauptgehäuse mit einem
Kreuzkopfschraubenzieher.
• Prenda o conjunto do anel da guarnição à carcaça principal
com uma chave de fenda Phillips.
• Fissi l'assemblea dell'anello della disposizione ad alloggiamento
principale con un cacciavite "phillips".
X3 PLACES
11
12
