____________________________________________________________________
_______________________________________________________________________
MN0090-05 Page 40 of 68 18008
MPT-90 PRODUCT MANUAL
This document contains U.S. export controlled technical data as regulated by the U.S. Export Administration Regulations 15 CFR Parts 730-774, export, disclosure or transfer contrary to U.S. law is prohibited.
4.5
MATING RECEPTACLE CONNECTOR WIRING
The following charts show the signals connected to the various
pins/conductors on the positioner’s connectors. Note that not all models or
variants use all connections, so check with your model number before
constructing wiring harnesses. You may choose to not to use some signals,
and therefore not make connections on your cables. It is recommended that
you use appropriate cabling sealing methods suitable for the environment of
use. This may include potting of the connector, or use of weather sealing
sheathing.
Fundamental power and operational communication is shown on the first
chart below:
