Moog G393-004, Operation Manual

Page: 57 / 112

MSD Multi-Axis System Operation Manual DC-AC Servo Drive
57
5 Commissioning
The following functions and displays are available:
•
Indication of the device status (see chapter 6.1.1 )
The device status is indicated after switching on the control supply. If no input
is made via the keypad for 60 seconds, the display switches back to the
indication of the device status.
• Indication of the device error status (see chapter 6.1.2 )
On the occurrence of an error in the device, the display is immediately switched
to the indication of the error code.
• Parameter setting (indication "PA") (see chapter 5.4.3 )
The device parameter configuration can be eset to the factory settings.
•
Ethernet IP address setting (indication "IP") (see chapter 5.4.4 )
Ethernet IP address and subnet mask setting
• Field bus settings (indication "Fb") (see chapter 5.4.5 )
E.g. field bus add ess setting
5.4 Integrated control unit
The integrated control unit permits diagnostics on the DC-AC Servo Drive. The control
unit comprises the following elements, all located on the front of the device:
• 2-digit 7-segment display (D1, D2)
• Two buttons (T1, T2)
D1
D2
T2
T1
Figure 5.1 Integrated control unit
moog
Id. no.: CA97554-001 0 5 /2017