7 Mounting and Connection to the Hydraulic System
Mounting the valves
© Moog GmbH User Manual "D633-A Series" (CA80942-001; Version 1.0, 12/08) 38
7.3 Mounting the valves
7.3.1 Tools and materials required
Tools and materials
required for mounting the
valves
The following tools and materials are required for mounting the valves:
• Flat-bladed screwdriver 8x1.6 [mm] and if necessary open-end
wrench WAF 8
(for removing the shipping plate)
• Torque wrench for hexagon socket head cap screws WAF 4
(for mounting the valve)
• Installation screws
Chapter "7.3.2 Specification for installation screws", page 38
• If necessary, replacement for port O-rings to be replaced
Chapter "13.2 Spare parts", page 66
7.3.2 Specification for installation screws
Specification for
installation screws
The installation screws and replacement O-rings are not included in the
valves’ scope of delivery. They are available as accessories.
Chapter "13.1 Accessories", page 65
Hexagon socket head cap screws
as per
Quality
class
Number
required
Tightening torque
M5x55
10.9
4
6.8 Nm (5.0 lbf ft) ± 10 %
Table 19: Specification for installation screws
