setup
DAY/NIGHT
You can specify a recording mode according to
the scene.
Select <CAMERA SET> - <DAY/NIGHT>.
Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <
ON
>, the burst signal will be output along with the black-and-
white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
BURST : If set to <OFF>, the burst signal
will not be output in NIGHT mode.
DAY NIGHT BRIGHTNESS : Specify the
brightness level switching from COLOR to
BW fi lter.
Adjusting from HIGH to LOW will cause to
switch the fi lter in a darker screen.
DAY NIGHT DWELL TIME : Time required
to determine the fi lter switch.
NIGHT DAY BRIGHTNESS : Specify the brightness level switching from BW to
COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a
darker screen.
NIGHT DAY DWELL TIME : Time required to determine the fi lter switch.
MASK AREA : If there exists a bright spot
light source in a night scene, you can
specify the size and position as needed.
This will prevent an error in switching fi lter,
or failure to determine the fi lter switch in
a night scene where a bright spot light
source exists.
Any excessively bright area in a night
scene will be MASKed.
You can specify MASK 1 and 2 simultaneously
.
If <
BACKLIGHT
> is set to <
BLC
>, the MASK AREA function is not available.
1.
2.
-
-
-
-
-
-
AUTO
DAY NIGHT
BRIGHTNESS
MID
DWELL TIME
2SEC
NIGHT DAY
BRIGHTNESS
MID
DWELL TIME
5SEC
MASK AREA
1 2
MASK AREA
<SIZE>
<LOCATION>
WHITE BAL
FOCUS MODE
ONEAF
ZOOM SPEED
[2]
DISPLAY ZOOM
OFF
DIGITAL ZOOM
OFF
[
L I A T E D
2]
- - - ) T N I (
C N Y S - V
AGC COLOR SUP
MID
BURST
OFF
DAY/NIGHT
AUTO
