Moog CVFC2-S25, Installation And Operation Instructions Manual

Page: 18 / 28

the focus manually, that will operate the same as in < MF >. This will also restore
focus after the operation of zoom.
of zoom, and operates the same as in < MF >
unless the operation of zoom is executed.
- MF : You can adjust the focus manually.
While you are working on the following
objects, < AF > may not work properly .
If this is the case, use < MF > instead.
- Very bright object, or dominant object in
a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
ZOOM SPEED
You can adjust the zoom operation speed.
DISPLAY ZOOM
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x25. If you set DIGITAL ZOOM to x16, you can take a shot at up to x400 (25x16).
When you set DISPLAY ZOOM as on, you may see zoom value on the screen.
DETAIL
Used to adjust the vertical and horizontal distinction, respectively.
V-SYNC
You can set the V-SYNC mode.
- If you select <
INT >, the camera will use the internal synchronization.
DA T U A T H G I N / Y O
WHITE BAL
FOCUS MODE ONEAF
ZOOM SPEED [2]
DISPLAY ZOOM OFF
DIGITAL ZOOM X16
] 2 [ L I A T E D
T N I C N Y S - V
AGC COLOR SUP MID
AF
SENSITIVITY [5]
NIGHT MID
- ONEAF : Restores focus after the operation
setup
- If selecting <LINE>, the camera will use an external power frequency for
synchronization. The LL-PHASE can be adjusted as appropriate.
AGC COLOR SUP
You can adjust the color reproduction range according to AGC.
REVERSE
You can reverse the video signal from left
to right, upside down, or vice versa to your
convenience.
POSI/NEGA
You can set the video brightness signal to
normal or reverse.
PIP
You can view a main image with a sub image on the same screen.
If more than one PRIVACY ZONE is specifi ed, and PRIVACY SET to < ON >, the PIP
function is not available.
As long as SENSE UP is set to FIXED, PIP menu is not available.
According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.
DIS
If you set it to < ON > for a camera that is trembled or vibrated from an ambient
If you set < DIS > to < ON >, the image will be enlarged with digital zoom as much
area as compensated.
If you set the digital zoom to a larger ratio than the actual enlargement for
compensation, the < DIS > function will be disabled.
< DIS > may not work properly in the following images:
Flat, i.e., no regular-patterned image / Low contrast scene / High frequency image
WHITE BAL
FOCUS MODE ONEAF
ZOOM SPEED [2]
DISPLAY ZOOM OFF
DIGITAL ZOOM X16
] 2 [ L I A T E D
C N Y S - V
AGC COLOR SUP MID
SCZ-2250P(N)
SCZ-3250P(N)
SCZ-2250PD(ND)
SCZ-3250PD(ND)
It’s a must to use AC 24V power supply when you select line lock for
and
Line lock is not available for and