Moog Claravox Centennial, User Manual

Page: 66 / 77

65
Calibration
nial will return to the normal playing mode, and
you are free to move normally.
TIP: Once in the Calibration mode, you can
press the SET ROOT button (prior to hitting the
STORE button in Step 4) to exit the Calibration
mode without making any changes.
Volume Near Position Calibration
Procedure (Modern Mode)
1.
Set the
TIMBRE
knob to the 2 position; set
the
MAIN OUTPUT
switch to
MUTE
.
2.
Enter the Calibration mode by simultaneously
holding the
STORE
and
SET ROOT
buttons.
Both LED indicators will begin to blink together,
once per second.
3.
Stand in your playing position, and place
your volume hand down where you would like
to achieve the minimum volume (closer to the
volume loop).
4.
Standing very still, use your other hand to
press the
STORE
button, and remain still.
5.
The
STORE
and
SET ROOT
LEDs will
continue to blink until calibration is complete.
Once calibration is complete, Claravox Centen-
nial will return to the normal playing mode, and
you are free to move normally.
TIP: Once in the Calibration mode, you can
press the SET ROOT button (prior to hitting the
STORE button in Step 4) to exit the Calibration
mode without making any changes.