Moog Claravox Centennial, User Manual

Page: 65 / 77

64
Calibration
64
TIP: Once in the Calibration mode, you can
press the SET ROOT button (prior to hitting the
STORE button in Step 4) to exit the Calibration
mode without making any changes.
Pitch Null Calibration Procedure
(Modern Mode)
1.
Set the
TIMBRE
knob to the 1 position; set
the
PERFORMANCE
switch to the
MOD-
ERN
mode.
2.
Enter the Calibration mode by simultaneously
holding the
STORE
and
SET ROOT
buttons.
Both LED indicators will begin to blink together,
once per second.
3.
Stand in your playing position, and place
your pitch hand up to the
NULL
position (this is
where you want to calibrate the note to go so low
that you cannot hear it).
4.
Standing very still, use your other hand to
press the
STORE
button, and remain still.
5.
The
STORE
and
SET ROOT
LEDs will
continue to blink until calibration is complete.
Once calibration is complete, Claravox Centen-
nial will return to the normal playing mode, and
you are free to move normally.
TIP: Once in the Calibration mode, you can
press the SET ROOT button (prior to hitting the
STORE button in Step 4) to exit the Calibration
mode without making any changes.
Volume Range Calibration
(Modern Mode)
In the
MODERN
mode, you can use the Vol-
ume Calibration routine to set the NEAR (mute
point) and the FAR (maximum volume) points to
suit your playing. Claravox Centennial comes set
up with a standard playing range, but you may
want to change where the effective “off” posi-
tion is, or change the response from a very short
amount of range to a large amount of range.
The normal
VOLUME
knob and
VOLUME
RESPONSE
knob still determine the contour
of the response within the desired range.
Volume Far Position Calibration
Procedure (Modern Mode)
1.
Set the
TIMBRE
knob to the 2 position; set
the
MAIN OUTPUT
switch to
ACTIVE
.
2.
Enter the Calibration mode by simultaneously
holding the
STORE
and
SET ROOT
buttons.
Both LED indicators will begin to blink together,
once per second.
3.
Stand in your playing position, and place your
volume hand up where you would like to achieve
the maximum volume (farther away from the
volume loop).
4.
Standing very still, use your other hand to
press the
STORE
button, and remain still.
5.
The
STORE
and
SET ROOT
LEDs will
continue to blink until calibration is complete.
Once calibration is complete, Claravox Centen-