- 3 -
Figure 7
CAMERA FOCUSING (Figure 7)
1.
The camera is factory equipped with a 3.6mm fixed lens. A
2.5mm lens is also provided. To remove the 3.6mm lens, loosen
the set screw and unscrew the lens counter-clockwise.
2.
Fine focusing of the lens: Loosen the set screw in the lens mount
and manually rotate the lens until a clear picture is achieved. Once
the focus is set, retighten the set screw.
Set screw
Fixed lens
CAMERA SETTINGS
SERIAL NUMBERS BEGINNING WITH YK
FIXED AND FIXED VARI-FOCAL LENSES. There are no user
adjustable settings on these units (Figure 8).
Figure 8
BW Fixed and Vari-Focal
NOTE:
To determine which camera is used in your unit, locate the
serial number on the inside of the housing. Match the two
letter prefix with the corresponding instructions included
here for adjustments.
The operational settings for the camera are defined by ten dip switch-
es located on the PC Board (Figure 9). Moving the switches to the on
position will activate each setting. Factory defaults are pictured below
(Figure 9).
FACTORY DEFAULT FIXED AND FIXED VARI-FOCAL LENSES:
Dip Switches 5 and 7 on, all others off.
Figure 10
Figure 9
Hi-Res Color, Fixed and Vari-focal fixed lenses
Dip Switches
Auto Iris
adjustment
screw
DO NOT
ADJUST
Factory
Use Only
Connection to
Power Board
NOTE: Dip switches are factory pre-set for optimum performance.
In certain
specific
instances it may be necessary to adjust
one or more settings. Consult a qualified technician before
making any adjustments
.
A Dip Switch settings chart is
available on the next page.
SERIAL NUMBERS BEGINNING WITH MC
