- 5 -
!
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
INSTALLING THE HOUSING ASSEMBLY:
INSTALLING OPTIONAL WALL MOUNT
1. Choose the desired location for installation and mark
the drill holes using the template. Screw (2) bolts (not
provided) about ¾ of the way into the (2) top holes. Run
approximately 8 of wiring out of the wall.
2. The wall mount bracket provided with the SM7 includes a
location for conduit entry. If you wish to install conduit to
WKHEUDFNHWUHPRYHWKHFRQGXLWKROHSOXJ,QVWDOOÀWWLQJIURP
below the wall mount and secure with conduit nut from
inside the bracket.
3. Open the access door on the bottom of the wall mount by
loosening the screw nearest the mounting plate.
4. Attach the wires from the wall to the connector provided.
using the wiring color code chart as a guide.
5. Once all wiring connections are made, place the wires
inside the wall mount bracket and close the access door.
Secure with the screw removed earlier.
NOTE:
Be sure the hardware and the mounting surface
can support the weight of the wall mount bracket
plus the weight of the housing and drive unit.
The load will be subjected to vibration from the
camera motor and wind.
CONNECTING THE TRIM RING ASSEMBLY TO THE
HOUSING TOP:
1. Open the access door on the bottom of the wall mount by
loosening the screw nearest the mounting plate.
2. There is a safety lanyard that is attached to the inside of
the dome assembly. Take the open end of the lanyard and
loop it around the lanyard tab that is located inside the
housing top.
3. The safety lanyard is now attached to the trim ring.
CARE AND CLEANING OF DOMES:
All SM7 units include an optically clear polycarbonate dome.
The dome is an optical device and should be handled with
H[WUHPHFDUH/HDYHSURWHFWLYHÀOPRQGRPHXQWLOSURGXFWLV
fully assembled and installed. Even though the dome is virtually
unbreakable, it
can
be easily scratched.
Clean only with a clean cotton cloth and warm water.
DO NOT use a strong solvent or cleanser!
