- 3 -
!
!
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
(SM7CS-9)
Power 24Vac , Class 2 Only
Total Power: 72 watts
Accessories (Heater/Blower): 52 watts
Heater: 50 watts
Blower: 2 watt
Camera Power: 20 watts
Be sure the bracket is properly and securely mounted
to a supporting structure capable of rigidly holding
the weight of the entire unit.
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
SM75C2N IP Ready Network Housing
Outdoor vandal resistant surface mount ptz IP camera system
that can be mount facing down or facing towards the sky.
23x zoom Day & night camera. MPEG-4 & MJPEG video
compression format, Full D1. Clear dome, w/24Vac input,
heater/blower
ASSEMBLING THE UNIT:
1. Remove content from all boxes.
Contents should include:
Main Housing Assembly
Dome Assembly - Clear or Tinted
Do
not
assembled and installed.
2 Packet Assemblies
INSTALLATION OF PTZ CAMERA
Pan/Tilt unit is boxed separately and must be installed into the
housing. Remove unit from box, slide the (2) pins on the pan/tilt
base through the rubber grommets as shown below. Unit will
not align unless base is fully pushed into place. Lower other end
of base and secure with captive fastener.
!
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
(SM7C12S-9)
Power 12VDC , Class 2 Only
Total Power: 42 watts
Accessories (Heater/Blower): 22 watts
Heater: 20 watts
Blower: 2 watt
Camera Power: 20 watts
