10
Drum Head Replacing
Bolts
x
5
Rim Cover
Drum Head
Sensor Cable
Step 1: Discharge 5 bolts which are fixed in the rim cover.
Step 2: Lift up the rim cover softly and take off the old drum head.
Step 3: Put the new drum head in and lay the rim cover back.
Step 4: Lock the 5 bolts up in order (clockwise or anti-clockwise).
Note:
During drum head replacing, pay attention to the cables of sensor inside the
drum, do not pull or bump them as possible.
Note:
When you want to tighten or loosen the drum head, screw the bolts in order
(clockwise or anti-clockwise).
