05
Operation
PATCH
LOOP
01
02
03
01
02
03
04
Entering Patch Status
At any time of using Synth Drum, press [PATCH] button to enter
Patch status, the middle dot of display will be lit up to indicate the
current status (Patch).
Selecting Patches
When in Patch Status, rotate [DIAL/ENTER] knob to select patches,
the patch’s number will be flashing, but the sound will not be
changed yet.
Confirm Patch Selecting
When the number of patch is flashing, press [DIAL/ENTER] button
to confirm selecting, the number will stop flashing, and the sound will
be changed to the current patch.
Entering Loop Status
At any time of using Synth Drum, press [LOOP] button to enter Loop
status, the left dot of display will be lit up to indicate the current
status (Loop).
Selecting Loops
When in Loop Status, rotate [DIAL/ENTER] knob to select loops, the
loop’s number will be flashing, but the music will not be changed yet.
Confirm Loop Selecting
When the number of loop is flashing, press [DIAL/ENTER] button to
confirm selecting, the number will stop flashing, and the music will
be changed to fit the corresponding loop.
Playing and Stop Playing
At any time of using Synth Drum, press [PLAY] button to play the
music, when playing, press [PLAY] button will stop the music.
Note:
When switching Patch or Loop, or pressing [PLAY] button to start loop playing,
the sound will phonate after few seconds.
