07
CURVE
Saving Patches
Note:
The CURVE contains both drum head and drum rim’s velocity curves, when
choosing one curve, the head and rim’s velocity curves will be changed together.
(refer to Appendix for detail).
Note:
After saving, the patches will be changed to user’s setting even though next
power on.
Note:
Do factory reset will initialize the patches to preset.
At any time of using Synth Drum, press [PATCH] and [EFX] button
simultaneity to enter velocity curve editing.
When in CURVE editing status, rotate [DIAL/ENTER] knob to change
velocity curve, there are 9 curves to be chosen, display will show
“ ~ ”, the default value is .
Synth Drum’s 200 Patches can be edited and saved by users, the
modifiable items include SENSE, CURVE and Effects’ parameters. User
can change the parameters of them and save them to the patches.
At any time of using Synth Drum, hold [DIAL/ENTER] button for 3
seconds to do saving operation, then the patch’s number, the middle
dot, and the right dot on the display will begin to flash together, at that
time, press [DIAL/ENTER] button again to confirm, the patch’s number
on the display will stop flashing.
When saving (the patch’s number, the middle dot, and the right dot flash
together), press other buttons (except [DIAL/ENTER]) to quit saving and
enter the corresponding status.
