MOODY 336 MK1, Owner'S Manual

Page: 6 / 59

Seacocks are fitted to all inlets and outlets which penetrate the hull below the
The hull area around the penetration point is reinforced with an internal
plywood backing plate which is resin coated and bedded on compound. With the
exception of the engine cooling system inlet, all current Moody yachts are fitted
with a ball valve combined with a skin fitting.
Water inlet seacock and strainer
This type of seacock is fitted to the engine
cooling system inlet and it is operated as
follows:
1 To open - turn the knob anticlockwise
2 To close - turn the knob clockwise
Skin
This type of seacock is used for sink,
shower and cockpit drains and marine
toilet inlet and outlets. It is operated as
follows:
1 To open - turn the lever to align with
the hose.
2 To close - turn the lever until it is at
right angles to the hose.
INLET HOSE
SKIN
L E V E R
(SHOWN
OPEN P O S I T I O N )
Water inlet seacock and strainer
(SHOWN OPEN
HOSE
SKIN
CLIP
BACKING P L A T E
R E S I N
COAT ING
Skin fitting/seacock
Page 1.2
Issue 3