MOODY 336 MK1, Owner'S Manual

Page: 54 / 59

Take sails ashore for cleaning and valet. Note particular areas you wish
sailmaker to check.
Plan sail modifications - recutting or replacement is normally cheaper out of
season.
Store sails ashore in the dry after work completed.
If possible cover the deck, coach r oof and deck joinery to reduce cleaning
effort on Make sure cover is supported clear of woodwork
to prevent chafing. Ensure cover is securely fastened.
Clean all running rigging, check for replacements.
Check all standing rigging. Replace rigging screws, shackles and terminals if
there are signs of excessive wear.
Check mast fittings - tracks, sheaves, blocks, spreader sockets, etc.
20 Remove old or loose antifouling, apply new coating.
21 Check all varnish and repair as necessary.
Procedure for
The following procedures should be carried out on all yachts when
laid up.
1 Run engine with coolant water mixed with antifreeze. Stop engine and drain
completely. This must be carried out afloat. If carried out ashore, the vibration
may cause damage.
2 Where engine are head exchanger cooled, antifreeze should be added to
closed circuit system to manufacturer's recommendation. On yachts destined
for shipment, water should be drained off.
3 Disconnect exhaust tubing from engine. Tape over exhaust outlet on engine.
4 Remove air cleaner, tape up air inlet on engine and inlet and outlet ports on air
cleaner itself, store air cleaner.
5 Remove impeller(s) from coolant water circulating pump and tie to pump to
which they apply for easy location when commissioning.
6 Drain lubrication oil from engine, fill with inhibiting oil.
7 Completely fill fuel tank. This reduces the possibility of corrosion from
condensation.
Page 7.2 Issue 3