MP7200® user instructions
10
Selection of the zone
When your appliance is in zoning mode, that is to say it plays different musicale
atmospheres on several zones, before any handling the display asks, the zone to
parameter.
Press the central "OK" key.
The display shows "
Audio choice - Zone 1
".
With the direction keys
◄
/
▲
/
▼
/
►
,
select the desired zone.
For example, zone 2.
Press the central "OK" key
to confirm the zone.
The display then shows "Music – GO!"
you can start your various
parameter setting in this zone.
Refer to the "MUSIC" menu on the
following page.
Important: When you make a direct announcement with the microphone, the message is
played on all the zones. As well as the setting of the sound’s volume (music and messages)
is the same on all the zones.
On the other hand, the pre-recorded or personal messages can have different parameters
from one zone to another.
Comment: If a quaver flickers on the display, it shows you are in zone 1.
When you have two or three quavers, the quaver that flickers represents the zone in which
you are setting parameters. For example, for 3 zones, if you work on zone 2, the second
quaver, present on the display will flicker.
Music
< >
GO
!
We
18
11/08/2003
18:32
MOODMEDIA2006
©
……..
We
18
Audio selection
Zone 1
We
18
Audio selection
Zone 2
We
18
