6
l
The technical details (supply voltage
and power input) are indicated
on the product rating plate.
l
Make sure that the electrical
system is earthed, complies
with all applicable law and that
the (electricity) socket is
compatible with the plug of the
appliance. Otherwise, seek
qualified professional assistance.
l
Do not use adapters, multiple
connectors and/or extensions.
l
The plug should be accessible
for disconnection after the
appliance has been installed.
l
Do not plug the machine in and
switch it on at the mains until
the installation is completed.
l
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Installation
Electrical connections and
safety instructions
WARNING
The appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by a utility.
l
Do not install the product in a
low
temperature room or in a
room
where there is a risk of
frost
occurring.
l
At temperature
s
around freezing
point the
product may not be
able to
operate properly: there is a
risk
of damage if the water is
allowed to freeze in the
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-
35°C. Please note that
operating in
cold
condition
s
(b2 and +5°C)
may cause
some water condensation
and water
drops on floor.
l
NEVER install the dryer up
near curtains.
l
The appliance must not be
installed behind a lockable door,
a
sliding door or a door with a
hinge
on the opposite side to
that of
the tumble dryer, in
such way
that a full opening of
the tumble
dryer door is restricted.
l
For your safety, the appliance
must be correctly installed. If
there
is any doubt about installation,
call
Service for advice.
l
Once the machine is in place
the
feet should be adjusted to
ensure
that the machine is
level.
Summary of Contents for MIHP75
Page 29: ......
