EN
5
l
Lint and fluff must not be allowed
to collect on the floor around the
outside of the machine.
l
Always remove the plug before
cleaning the appliance.
l
The drum inside may be very
hot. Always allow the dryer to
complete the cool down period
before removing the laundry.
l
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
WARNING
Do not use the product if the
fluff filter is not in position or
is damaged; fluff could be
ignited.
WARNING:
Where the hot surface
symbol
is located the
temperature
rise
during
operation of the tumble
dryer may be in excess of 60
degrees C.
WARNING
Never stop a tumble dryer
before the end of the drying
cycle unless all items are
quickly removed and spread
out so that the heat is
dissipated.
WARNING
During transport ensure that
the dryer is in an upright
position, if it's necessary
you can only
tilt/lay on
the side shown
below.
If the product
has been
tilted or laid on its
side, wait
at least 4 hours before
switching on so that the oil
can flow back into the
compressor. Failure to do
this
could
result
in
damage to the compressor.
Summary of Contents for MIHP75
Page 29: ......
