INSTALLATION OF YOUR COOKER
ELECTRICAL CONNECTION
•
The adjustment values for this appliance are stated on the rating
label.
•
Your appliance requires a 32-40 Ampere supply. Installation
must be carried out by a qualified electrician.
•
Electrical connection of the cooker should only be made to
connections/sockets with an earth system installed in compliance
with statutory regulations.
•
The manufacturer is not responsible for any damage that may
arise as a result of the appliance not being connected to a
suitable earthing system.
•
Your cooker is for use with 220-240V AC or 230V AC for mono
phase and 230V/400V 3N for 3 phase 50-60 Hz electric supply. If
your supply is different to that specified, contact a qualified
electrician.
•
When siting your cooker into its location, ensure the hob top is at
work top level, by adjusting the feet if necessary.
•
Some models are supplied without a plug and lead set. In this
case please use a flexible cable suitable for connection to a mono
phase supple: H05 VV-F 3 G 2,5 mm2, H05 VV-F 3 G 4 mm2 or for
3phase: H05 VV-F 5 G 1.5 mm2.
Summary of Contents for ECO TCC60
Page 9: ...CONNECTION...
