Page 31
XG0219 - 080421
Operation
Operating the Fireplace
Follow all warnings and instructions when using the appliance
CAUTION
ON
Off
Color ring
Mode+
Mode-
Indicating light
Speed+
Bri
Brightness-
Speed-
The unit is controlled using the ON/OFF switch at the side of the
control box or by using the optional remote control (RXM40VACVO).
When placed in the ON position the fans will initialize, the igniter will
start to glow and the pilot will light, followed by the main burner.
When placed in the OFF position the flame and fans will turn off.
If the fireplace does not light after two attempts it will go into a safety
lock-out mode. After five minutes the fireplace will attempt to light
again. If the fireplace will not light, turn the fireplace off, turn off all the
electrical power to the appliance, locate the gas shut off valve and turn
the gas off. Call your service technician or local Montigo dealer.
Never
attempt to light the pilot by hand.
This fireplace includes a screen barrier which helps prevent injury from
burns. Never operate this appliance without the screen attached. Children
and other at risk individuals should be monitored at all times.
Operation Suggestions
• If on a windy day the fireplace flame goes out unexpectedly while
the fan is set at high speed, toggle switch to slow speed. The flame
should relight.
• If on a calm day you prefer warmth spread farther from the fireplace,
switch may be set to high speed.
• If on a cold morning the fireplace doesn’t light on slow speed,
switch to high speed until the fireplace is warm, then switch back to
low speed.
Operating the Accent Lights
The accent lighting is operated by the LED remote control. See LED
Remote Control Operation section for detailed instructions.
Summary of Contents for MAHANA PL42VO
Page 43: ...Page 43 XG0219 080421 Notes ...
