Page 13
Hotshot Gas Fireplace Insert
XG0511 - 150203
Installation
2.
Unpack the logs. Be sure to handle the logs carefully, as they are
very fragile.
3.
Place the Back log onto the back log rest as shown below in
figure 12a
. The log has lip on the bottom which fits into the slot
on the log rest.
4.
Place the Front log onto the front log rest as shown in
figure
12a
. Centre the log from side to side, and push it against the
back of the log rest. Carefully push the log onto the metal spikes
on the log rest.
5.
Place the top logs in position as shown in
figures 12b
and
12c
.
5.
Start the fireplace. If the flame appears satisfactory, replace the
glass door and door cover.
Figure 12a.
Positioning for the top logs ('C' and 'D' ).
Installing the Log Set
Installing the Logs:
The double burner
Hotshot
is supplied with a six (6) piece fibre log
set.
1.
Remove the door cover and the glass door.
Back log
Left log
Right log
Front log
Center logs
Figure 12b.
Proper placement (top view).
Back log
Front log rest
Back log rest
Heat exchanger tubes
Front log
Front burner tube
Back burner tube
Ember tray
Back log
Left log
Right log
Front log
Center logs
Figure 12c.
Log placement as seen from the front of the stove.
NOTES
:
If the logs are not placed properly, excessive sooting
will result.
The surface of the logs will crack due to the heat from
the flames. This is a normal occurrence
