P/N XG0667
Page
Gas Conversion Kit for DXFS/DFSP-MH models
Table Of Contents
General Information
................................................................. 2
Parts list
.................................................................................... 2
Conversion
Before you begin ............................................................ 3
Front Burner ................................................................... 3
Rear Burner.................................................................... 3
Pilot Assembly ................................................................ 3
Main Gas Control Regulator........................................... 4
Check the Gas Pressure ................................................ 4
Adjusting the Pilot Burner............................................... 4
Operation
................................................................................... 5
General Information
This gas conversion kit contains the necessary components for field
conversion of an approved Montigo fireplace from Natural Gas (NG)
to Liquid Propane (LP). This kit is approved for use with the top and
rear vent versions of the following
manufactured (mobile) home
models:
DFSP
DXFS
DFSP-MH
DXFS-MH
A manufactured (mobile) home OEM installation in the
United States
must conform with the Manufactured Home Construction and Safety
Standard,
Title 24 CFR, Part 3280
, or, when such a standard is not
applicable, the Standard for Manufactured Home Installations,
ANSI
/ NCSBCS A225.1
. In
Canada
, the installation must conform to the
Standard for Gas Equipped Recreational Vehicles and Mobile Hous-
ing, CSA Z240.4.
The installation of this unit must also conform with local codes or, in
the absence of local codes, with the
American
National Fuel Gas
WARNING!
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer's instructions
and all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer's instructions supplied with this kit.
Parts List
Quantity
Description
1
Pilot orifice
1
Rear burner orifice
1
Front burner orifice
1
Gas control valve regulator assembly
1
Label for rating plate indicating conversion
1
Label for gas control valve indicating conversion
1
Rear Burner
1
Front Burner
