7
6
8
Wards.com
1
•
888
•
557
•
3848
Wards.com
Installation
(cont’d)
Installation
(cont’d)
Remove air conditioning unit and accessories from box. Save box to use for storage
of unit during the winter or when not in use for long periods of time.
1. Upper Guide
Secure the Upper Guide (Item E) to the top of the air conditioner using the 3 screws
(Item A) provided.
Item
Name of Part
Qty.
A
SCREW (ST4X10FT)
3
B
SCREW (ST4X16FT)
5
C
GUIDE PANEL (LEFT)
1
D
GUIDE PANEL (RIGHT)
1
E
UPPER GUIDE
1
F
FOAM STRIP (Adhesive back)
1
G
FOAM STRIP (Non-adhesive back)
1
Tools Required for Installation
• Gloves
• Cross-Tip screwdriver
• Pliers
• 3/8-inch adjustable wrench
• 1/4-inch hex socket and rachet
• Tape measure
• Drill (if pilot holes are needed) with 1/4-inch drill bit
2. Guide Panels
Extend the curtains in the left and right guide panels (Items C & D). Fit them into
the T-shaped groove on each side of the unit, and slide into place.
3. Foam Strip
Cut the adhesive-backed foam strip (Item F) to the width of the window. Remove
backing from foam and attach strip to the underside of the window.
4. Window Center
With the window open, find and mark the center line of the inner sill.
CAUTION: Hold unit firmly until window sash is lowered to top channel behind the
upper guide. Personal injury or property damage may result if the air conditioner
falls from the window.
5. Install Air Conditioner in Window
Carefully fit the unit into the open window, lining up the center of the unit with the
center line on the sill.
Firmly hold on to unit while lowering the window sash down
behind the upper guide.
Extend side curtains to fill the open window.
