To minimize shock and fire hazards when connecting and discon-
necting shore cord:
To connect:
1. Turn “OFF” the boat’s main AC breaker switch.
2. If the outlet on the pier has a disconnect switch, turn the switch
in the “OFF” position.
3. Connect shore power cable at the boat first.
4. Make sure the cable has more slack than the mooring lines.
5. Remove the cap from the outlet on the pier. Connect the other
end of shore cable to the outlet on the pier.
6. If polarity warning indicator is activated, immediately disconnect
cable.
7. Set the shore disconnect switch in the “ON” position.
To disconnect:
1. Set the 110 volt AC MAIN switch in the “OFF” position.
2. If there is a disconnect switch on the shore, set the disconnect
switch in the “OFF” position.
3. Disconnect shore power cable at shore outlet first.
4. Disconnect the power cable from the inlet in the boat. Replace
the cap over the inlet.
5. Place cable in storage for future use.
Some marinas have been known to “break” shore power
ground circuits to prevent electrolysis. Opening the
ground circuit creates a potentially dangerous on board
shock hazard. Ensure that your shore power cable
ground circuit is always continuous.
Generator Breaker
– Makes or breaks the connection between the
generator and the AC control panel. DO NOT switch while the gener-
ator is operating.
Shore Power Breaker
– Makes or breaks the connection between
shore power and the AC control panel. DO NOT switch while shore
power is being used.
Generator Running Light
– Indicates that generator power is being
received by the AC control panel.
Reversed Polarity Light
– Indicates if the polarity of the generator
output (wiring) has been reversed.
!
WARNING
!
SHIP SYSTEMS
11-6
Summary of Contents for 278 SC Sport Cruiser
