user’s manual
user’s manual
english
english
user’s manual
user’s manual
english
english
21
7) Join together the backs of the first RA18 to the second RA18 or the first
RA16, using 2 pins and 2 plates and the attachment holes marked for 0°
splay angle.
8) Continue with the assembly of the other RA16 speakers, by fitting the
pins to the plates using the attachment holes marked with the desired
splay angle. In case a third or fourth RA18 must be assembled in the array,
always maintain a 0° splay angle between them and with the first RA16.
Refer to chapter 4 of the PALCOPlus user' manual.
9) Always verify that the pins are
inserted correctly, by trying to
remove them: it is mandatory that
they cannot be extracted if the
release button is not pressed
(figure 2.7).
Figure 2.7
