background image

user’s manual

user’s manual

english

english

14

user’s manual

user’s manual

english

english

IMPORTANT !   SAFETY INSTRUCTIONS

WARNING

In order to protect your own and others' safety and to avoid invalidation of the 

warranty of this product, please read this section carefully before operating this 

product.

- This system (RA16, RAB1815 and supplied accessories) has been designed and 
manufactured for being operated as speaker system in the applications typical of a sound 
reinforcement system. Operation for purposes and in applications other than these has 
not been covered by the manufacturer in the design of the product, and is therefore to 
be undertaken at end user's and/or installer's sole risk and responsibility.

TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:

• Never expose these products to rain or moisture, never use it in proximity of water or 
on a wet surface. Avoid dripping water or water sprays, moreover never place objects 
full of liquid, such as vases, on top of it. Never let any liquid, as well as any object, enter 
the products. In case, immediately disconnect it from the power amplifiers and refer to 
servicing before operating it again. Never place burning candles or other sources of open 
flame on top of the device.

CAUTION!

These products do not contain user serviceable parts. 

To prevent fire and/or electrical shock, never disassemble them or remove the panels. 

For maintenance and servicing always refer to the official Montarbo Distributor in your 

Country or to qualified personnel specifically authorized by the Distributor. 

- When setting-up the system for operation, make sure that the shape and load rating 
of the surface or the structures that will support it can safely match the product size and 
weight. If you wish to suspend (fly) the system, follow the directions of chapter 3.

- To avoid shocks, kicks, or whatever action, always reserve a protected area with 
no access to unqualified personnel as installation site of the product.  

- In case the product is used near children and animals closest supervision is necessary.

- This product can generate very high acoustic pressures which are dangerous for the 
hearing system. Always avoid operation at loud levels if anyone is excessively near to the 

product.

Never expose children to high sound pressures.

The lighting flash with arrowhead 

symbol within an equilateral triangle, 

is intended to alert the user to the 

presence of uninsulated "dangerous 

voltage" within the product's 

enclosure, that may be of sufficient 

magnitude to constitute a risk 

of electric shock to humans.

The exclamation point within an 

equilateral triangle, is intended 

to alert the user to the presence 

of important operating and 

maintenance (servicing) instructions.

Summary of Contents for PALCO PLUS RA18





























Reviews: