NM815
| owner
’
s manual
19
NM15SA – Presets
(1 )
(1 )
(2 )
(2 )
LF
HF
I
O
PUSH
PUSH
0
+6
-12
Pwr on
Prot
1
2
3
4
PRESET
MASTER VOL.
SUB BAL.
VOL
0 dBu
Sub Lim.
Sig/Lim
IN L
IN R
LINK L
LINK R
L SAT 400W
POWER COMSUMPTION 1600W
INTERNAL FUSE F10 AL
AC LINE IN
POWER
Preset
I
O
R SAT 400W
Sig/Lim
[A]
[B]
[P1]
[P2]
[P4]
[P3]
[PRESET]
[C]
[D]
[E]
[A]
LEFT-IN bi-colour LED (
Sig/Lim
): the green light indicates the presence
of input signal; the red light indicates the saturation (clipping) of the
LEFT input level. It may remain lit also in case no signal is detected
until a next valid signal.
[B]
RIGHT-IN bi-colour LED (
Sig/Lim
): the green light indicates the presence
of input signal; the red light indicates the saturation (clipping) of the
RIGHT input level. It may remain lit also in case no signal is detected
until a next a next valid signal.
[c]
Green LED (
Pwr on
). It indicates the condition of the power supply.
[D]
Red LED (
Prot
). This LED indicates the intervention of the protection
circuit of the internal power amplifiers. The reason may be an excess
in terms of temperature, of output current or a fluctuation in mains
supply value (lighting strikes or brown outs).
[E]
Red LED (
Sub Lim
). It indicates the subwoofer amp clipping.
[P1] [P2] [P3] [P4]
These green LEDs indicate the active preset. The system turns on with
the last selected preset. Each time you press the
[PRESET]
button
the next preset is loaded. The preset loading takes about a second,
during this time the system is muted.
[PRESET]
This button allows you to select the desired preset. Each time you
press the button the next preset is loaded. The preset loading takes
about a second, during this time the system is muted.
❯❯❯
For a description of the presets please refer to page 24