owner
’
s manual |
NM815
18
NM
815
NM15SA – control and connection panel
(1 )
(1 )
(2 )
(2 )
LF
HF
I
O
PUSH
PUSH
0
+6
-12
Pwr on
Prot
1
2
3
4
PRESET
MASTER VOL.
SUB BAL.
VOL
0 dBu
Sub Lim.
Sig/Lim
IN L
IN R
LINK L
LINK R
L SAT 400W
POWER COMSUMPTION 1600W
INTERNAL FUSE F10 AL
AC LINE IN
POWER
Preset
I
O
R SAT 400W
Sig/Lim
[2]
[5]
[7]
[3]
[10]
[1]
[4]
[9]
[6]
[8]
[11]
[1]
AC LINE IN. AC line input connector. Connect it to the mains socket
using only a mains cable with suitable conductors capable of handling
the current involved, equipped with a ground conductor, marked with
the applicable, country specific, safety approvals and fitted with a
power plug certified for the actual current value.
When installing the speaker system, make sure that it is easy to get
to this socket and to the mains plug.
[2]
Mains ON/OFF switch.
[3]
LEFT input connector. It is a 3-pin female XLR balanced connector,
that may be fed by both balanced or unbalanced sources. To be wired
to the LEFT master of the mixer.
[4]
RIGHT input connector.
It is a 3-pin female XLR balanced connector,
that may be fed by both balanced or unbalanced sources.
To be wired
to the RIGHT master of the mixer.
[5]
LEFT input LINK connector. It is wired in parallel to the input connector
[3]
and it makes possible to send the input signal to other equipment
(usually to other self-powered speaker systems).
[6]
RIGHT input LINK connector. It is wired in parallel to the input
connector
[4]
and it makes possible to send the input signal to other
equipment (usually to other self-powered speaker systems).
[7]
Master volume control that adjusts the system's volume.
[8]
Subwoofer balance control. It allows the subwoofer/satellite balance
within a 18 dB range.
[9]
LEFT output connector. It's a 4-pole speakON
®
socket to be
connected to the left NM8Bi satellite.
[10]
RIGHT output connector.
It's a 4-pole speakON
®
socket to be
connected to the right NM8Bi satellite.
[11]
PRESET button.
Please refer to the «Presets» paragraph on the
following page.
❯❯❯
Refer to page 23 for connector wiring instructions.
❯❯❯
For multiple system linking refer to page 30
speakon
®
is a registered trademark, under the property of neutrik aG
