processor controlled active speaker system
MT200A
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
10
10
11 - 12
13
15 - 21
16
16
16
17
17
18 - 20
21
ENGLISH
9
ENGLISH
INDEX
Introduction
Description
Control and connection panel
Important !!!
Appendix
◗
Technical Specifications
◗
Response curve
◗
Block diagram
◗
Connectors
◗
Connections
◗
Applications
◗
Spare parts
The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert
the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure,
that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle, is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions.
PACKAGE CONTENTS
◗
MT200A active system
◗
Power supply cable
◗
Owner’s manual
◗
Warranty certificate
◗
CE declaration of conformity
IMPORTANT !
SAFETy INSTRuCTIONS
WARNING
In order to protect your own and others' safety and to avoid
invalidation of the warranty of this product, please read this section
carefully before operating this product.
- This product has been designed and manufactured for being operated as
active speaker system in the applications tipical of a sound reinforcement
system or of a sound recording system. Operation for purposes and applications
other than these has not been covered by the manufacturer in the design of
the product, and is therefore to be undertaken at end user's and/or installer's
sole risk and responsability.
- This unit conforms to Class 1 insulation, and for safe use it is required that the
protective earth contact is connected to a grounded (earthed) outlet.
TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:
•
Never expose this product to rain or moisture, never use it in proximity of water
or on a wet surface. Never let any liquid, as well as any object, enter the product.
In case, immediately disconnect it from the mains supply and refer to servicing
before operating it again. Never place burning candles or other sources of open
flame on top of the device.
•
Before connecting this product to the mains supply, always make sure that
the voltage on the mains outlet corresponds to that stated on the product.
•
This product must be connected only to a grounded mains outlet complying
to the safety regulations in force via the supplied power cable.
In case the power cable needs to be substituted, use exclusively a cable of the
same type and characteristics.
•
This device is connected to the power line even when the mains switch is in
the ‘0’ (off) position and the power indicator is off. As long as it is plugged in
there are potentially dangerous electrical potentials inside the device, so, before
undertaking any sort of maintenance work etc., always make sure it has been
unplugged from the mains socket.
•
Never place any object on the power cable. Never lay the power cable on a
walkway where one could trip over it. Never press or pinch it.
•
Never install the product without providing adequate airflow to cool it.
Never obstruct the air intake openings on it. Leave enough room to get to the
mains power socket and the mains connector on the back panel.
•
In case the fuse needs replacement, substitute it only with one of the same
type and rating, as stated on the product.
•
Always make sure the Power switch is in its '0' (= off) position before doing
any operation on the connections of the product.
•
Before attempting to move the product after it has been installed, remove all
the connections.
•
To disconnect the power cable of this product from the mains supply never
pull the cable directly. Hold the body of the plug firmly and pull it gently from
the mains supply outlet.
CAUTION!
This product does not contain user serviceable parts.
To prevent fire and/or electrical shock, never disassemble it or
remove the rear panel. For maintenance and servicing always
refer to the official Montarbo Distributor in your Country or
to qualified personnel specifically authorised by the Distributor.
- Before placing the product on a surface of any kind, make sure that its shape
and load rating safely match the product size and weight.
When installing the speaker system on a stand, use a stable stand that will fit in
the adapter and may carry the loudspeaker weight. When two loudspeakers are
laid one upon the other, make sure that stability is guaranteed by matching the
upper loudspeaker feet to the lower loudspeaker cavities.
-
To avoid shocks, kicks, or whatever action, always reserve a protected area with
no access to unqualified personnel as installation site of the product. In case the
product is used near children and animals closest supervision is necessary.
-
This product can generate very high acoustic pressures which are dangerous for
the hearing system. Always avoid operation at loud levels if anyone is excessively
near to the product (at least 1 m of distance).
Never expose children to high sound sources.
