23
www.montanarigiulio.com
MGX19
ENGLISH
8. OPERATION
8.1 Connections
Connect the motor, brake, and monitoring devices.
The connection must be made by qualified personnel in accordance with the
applicable safety regulations. Installation and operation requirements and cur-
rent national and international standards must be met.
8.2 Additional components
If third party additional components or options are installed, please refer to the
information in the respective separate documentation provided.
8.3 General operation information
When operating the MGX19 unit, be sure to check that the following situations
do not occur:
• Excessive operating temperature.
• Excessive and unusual noise.
If any irregularity occurs during operation, turn off the power immediately. Iden-
tify the cause of the malfunction by using the table in Chap. 9, containing a list
of possible problems, causes and suggested remedies.
9. TROUBLESHOOTING, MAINTENANCE AND REPAIR
9.1 General information
Observe all safety rules.
Do not disassemble the motor on site.
The bearings are protected and do not require any additional lubrication under
standard conditions of use.
Do not use high-pressure cleaners on the motor.
Montanari cannot guarantee or be held responsible for unauthorized operations
on the unit, improper use, modifications made without its consent or the use of
non-genuine spare parts.
If the cause of the malfunction cannot be identified, or if the unit has
been repaired using the means available, you should contact one of our
service centres for a specialised service.
!
Problems and malfunctions occurring during the warranty period, which
are not precisely identified or which require work on the unit, must be
referred to the manufacturer’s Customer Service department.
!
When repairing problems or malfunctions, the unit must be put out of
service in order to prevent unintentional start-up. Place a warning sign
on the starting switch.
!
