20
Below an example for setting the parallel connection of the brake coil.
-
Standard mode:
It is possible controlling only contactor 1 and leaving contactors 2 and 3 closed.
(Fig. 12).
This protects the brake from dangerous overvoltage and noise when closing.
- Emergency mode and inspection mode:
The use of all contactors is recommended. Using only contactor no. 1 during
opening and/or closing operations may cause an unacceptable delay when
closing the brake.
Typical application with brake coils in parallel configuration.
Power supply
Brake
Microswitch cable
Coil power supply
cable
Blue Black Grey
Blue Brown
Fig. 11
Fig. 12
CONTACTOR N°1
BRAKE COIL N°1
BRAKE COIL N°2
CONTACTOR N°3
230 V
ac
˜
CONTACTOR N°2
207 V
DC
