4
SAFETY INFORMATION
SAFETY ALERT SYMBOL
The symbol shown below is used to call your attention to instructions concerning your personal safety.
Watch for this symbol, it points out important safety precautions. It means
ATTENTION! Become Alert!
Your Personal Safety Is Involved!
Read the message that follows and be alert to the possibility of personal injury or death.
DANGER:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious
injury.
WARNING:
Indicates a potentially hazardous situation that, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous situation that, if not avoided may result in minor or
moderate injury.
WARNING!
Anyone who will operate or work around a front-end loader should first read this manual.
IMPORTANT SAFETY PRECAUTIONS
This symbol is used to call attention to safety precautions that should be followed by the operator to avoid
accidents. When you see this symbol, carefully read the message that follows and heed its advice.
Failure to comply with safety precautions could result in serious bodily injury.
In addition to the design and configuration of equipment, hazard control and accident prevention are
dependent upon the awareness, concern prudence and proper training of personnel in the operation,
transport, maintenance and storage of equipment. Lack of attention to safety can result in accident,
personal injury, reduction of efficiency and worst of all – loss of life. Watch for safety hazards and correct
deficiencies promptly. Use the following safety precautions as a general guide to safe operations when
using this machine. Additional safety precautions are used throughout this manual for specific operating
and maintenance procedures. Read this manual and review the safety precautions often until you know
the limitations.
THE TRACTOR AND/OR LOADER
1. Read the tractor and/or loader operator’s manual to learn how to operate your tractor and/or loader
safely. Failure to do so could result in serious injury or death and equipment damage.
2. It is recommended that tractor be equipped with Rollover Protective System (ROPS) and seat belt
used for all loader operations.
3. Add wheel ballast or front weight for stability.
Summary of Contents for 100
