SERVICE
Carriage Position Handle
(Figure 25)
Handle Tension Adjustment
If carriage is difficult to move or will not stay in
place, the handle tension requires adjusting.
1. Remove black ball knob and chrome
sleeve.
2. Turn threaded rod clockwise to increase
tension; turn counter-clockwise to
decrease tension.
Carriage Tension Spring Adjustment
Procedure
Carriage adjustments should be made with
grid irons in place and allowance for product
weight.
Carriage Tension Spring
(Figure 26)
1. Remove Drip deflectors to locate the
carriage tension spring adjustment nut.
The adjustment nut is accessible from the
front as follows:
Model #’s 36W36 and 43W36:
Through lower cabinet.
Model #’s 136W36 and V136W3:
Behind Valve Panel (Remove shields)
Model #’s C36, C45, 236W36 and
243W36:
Behind left and right front
panels. (Remove drip shields)
2. Turn nut clockwise to increase tension or
counterclockwise to decrease tension.
3. If one side of the grid is lower than the
other side, turn the adjustment nut on the
low side clockwise to level the grid.
25
Adjustment
Nut
Carriage
Tension Spring
Summary of Contents for 136W36'
Page 31: ...EXPLODED VIEW 29 C36 C45 ...
Page 33: ...EXPLODED VIEW 31 36W36 43W36 ...
