STEP 3
Make sure your phone or tablet is successfully connected to the
2.4GHz Wi-Fi network
that your Digit will be placed on.
STEP 4
It is recommended to pair Digit in a location close to your router
BEFORE installation. Segments do not need to be connected to
the controller to pair.
NOTE:
At any point during pairing mode you can unplug and
reconnect the power to cancel pairing and operate the product
without Wi-Fi. Advanced features will not be available.
Plug the power adapter into the bottom of the controller and
connect the other end to a powered wall outlet. The LED indicator
will begin blinking rapidly when it has entered pairing mode and is
ready to pair. (Any connected segments will blink as well.)
Open the app and create an
account by following the on-screen instructions.
Press and hold the power button for
5-6 seconds to enter pairing mode or
change between pairing modes.
Pairing Modes:
power
button
LED
indicator
EZ MODE
-
RAPIDLY BLINKING LED (default)
EZ Mode is the default mode for quick and
easy pairing setup.
AP MODE
-
SLOWLY BLINKING LED
Access Point Mode is a secondary setup that
can help connect to mixed networks.
Follow
the on-screen step by step instructions.
Monster Smart devices only work on a
2.4GHz Wi-Fi network.
Many newer home Wi-Fi networks are mixed networks that are set
to 5GHz by default (ex: AT&T, Verizon) and you may need to use
AP pairing mode to connect. If you still have difficulty, contact your
Internet Service Provider for assistance with 2.4GHz network setup.
2
3
